Menu
Firma
Novinky

Novinky

A close up of the MFT525

Megger's tough new insulation testers!

Capable of providing accurate measurements up to 10 TΩ for 5 kV versions and 20 TΩ for 10 kV versions and having facilities for IR, IR(t), PI, DAR, DD, SV and ramp tests, Megger's new high-voltage insulation resistance testers (IRTs) offer exceptional versatility in a compact, rugged and light unit that weighs little more than half as much as its predecessors.

Přečíst si více
MTO330 transformer ohmmeter

MTO300 Series - six-winding transformer ohmmeters

Megger MTO300 series transformer ohmmeters measure all six windings of a three-phase transformer automatically without changing connections. With test current capability up to 10 A, they provide simultaneous winding magnetisation to ensure fast, accurate results, and auto-demagnetisation after test. And, by sharing the same lead set as Megger TTR turns ratio testers, they make transformer testing even more convenient.

Přečíst si více
DLRO100 digital low resistance ohmmeter

New high current micro-ohmmeter works your way

Megger’s new DLRO100 digital low resistance ohmmeters are readily portable lightweight instruments that can deliver a test current of 100 A. They can be supplied with internal rechargeable Li-ion batteries that provide sufficient power for up to 200 manual/automatic tests on a single charge. This makes it easy for users to perform high-current low-resistance testing in almost any location, even if there is no access to a mains supply.

Přečíst si více
HVB10 high-voltage bridge

New Megger bridge finds HV cable faults quickly and accurately

Robust, readily portable and easy to use, the HVB10 high-voltage bridge from Megger allows cable and sheath faults in power cables to be prelocated reliably and accurately, even in difficult applications. The instrument, which also has facilities for sheath fault testing and sheath fault pinpointing, is particularly suitable for use on long HV cables, and in situations where pulse-reflection methods of fault prelocation do not give satisfactory results.

Přečíst si více
MTO250 transformer ohmmeter

Ohmmeter tests transformers faster and safer

With the capability of testing two windings simultaneously, Megger’s new MTO250 transformer ohmmeters reduce the time needed for testing by up to 50% compared with conventional instruments, making them an ideal choice for field and factory testing of current transformers, potential transformers and power transformer windings. The new testers also incorporate a comprehensive range of safety features to protect the user and the asset under test.

Přečíst si více
Power quality analyser MPQ1000

Power quality analyser gives Class A versatility

The new MPQ1000 handheld three-phase power quality analyser from Megger makes power quality analysis easier, more convenient and more effective than ever before. Highly intuitive in operation, the MPQ1000 delivers exceptional versatility and performance in a robust yet ergonomic package. In addition, the new instrument is IEC 61000-4-30 Class A compliant for all measurements and it has a CAT IV 600V safety rating. These features make it ideal for a wide variety of applications including substation monitoring, load studies and load balancing as well as for investigating switchgear and component failures.

Přečíst si více
TPT320 two-pole tester

Safely check for live circuits with Megger's new two-pole tester

Compact, convenient and versatile, Megger’s new TPT320 two-pole tester provides electrical contractors with a safe and reliable way of checking AC and DC voltages from 12 V to 690 V. Designed from the outset with safety in mind, the new tester not only has a CAT IV 600 V safety rating in line with EN 61010-1:2010, it also complies fully with the recently introduced EN 61243-3:2010 standard that specifically covers the safety of two-pole voltage testers.

Přečíst si více
SMRT36 protection relay system

SMRT36 - the smart solution for relay testing

The SMRT36 is a smaller and lighter protective relay test set, and has more output power than any other comparable three-phase instrument available anywhere. The SMRT36 has a unique constant power output, produces a compliance voltage of 50 V at up to 4 A (200 VArms), and maintains 200 VA output power up to 30 A, making it ideally suited for testing in today's installations and legacy plants. Also, with its forward thinking design, the SMRT36 is positioned for future challenges associated with smart grid testing.

Přečíst si více
HV DAC300 test set

Test diagnostics for HV cables in a single system

To maximise both user convenience and value for money, Megger’s new HV DAC300 test set combines withstand testing facilities and partial discharge diagnostics for HV cables operating at up to 230 kV in a single readily transportable system. The DAC300 uses damped AC (DAC) voltage technology to energise the cable and is capable of generating peak voltages of up to 300 kV. It can be used with cable with capacities of up to 8 µF.

Přečíst si více
SVERKER900 for substations

The ultimate testbox for substations

Portable test equipment expert, Megger, has launched a new protection relay and substation test system that combines exceptional versatility with rugged reliable construction, portability and ease of use. In a single compact unit, the new SVERKER900 provides engineers with a comprehensive range of tools that cover all major requirements for single and three-phase testing in distribution substations, renewable power generation installations and industrial applications.

Přečíst si více
  • <
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • >
  • Zobrazuji položky 41 - 50 z 52 celkem